KarmaFX Forum

Hi MadPsyance!! So sorry for my late reply... (been busy wrapping up version 0.96 which is due out any day now...) Yes!, I try to make it versions backwards compatible, so old patches really _should_ load without problems! This it also a great help for me, since I don't have to update all the preset...

hi chris !
Just trying to understand what you want...
a modulator which outputs 1 on noteon events and 0 on noteoff events ? Is that it ?

-double post-

Glad you like it !!!

there is still lots more to come btw...

btw, Matthew: have you forgotten to read your private messages ....I sent you a message Sept.24 that it looks like you still havn't read ?

Yep, and I'm using your drawing as inspiration, Soundscape !
Thanks!

I'm currently implementing a S&H module, and would appreciate your input. It actually does S+H and slew limiting at the same time: There's a rate knob to control the internal clock of the sampling. Like the LFO, the rate can be sync to host tempo. A Curve knob controls the transition curve from ...

Hi TC! Thanks for the suggestions! 1) Sounds interesting... I'll try to read up on what this module does, to see if it is possible to simulate... 2) Yes, I agree...a pattern like editor (controller quite like step modulator but with notes) is now a planned feature! 3) In what way "distorted&quo...

also are you running "one" or "more" instances of the synth ?

it sure sounds like the bug that was present in 0.95b...but I havn't experienced it since....so I thought it was fixed in 0.95c! I don't think you're doing anything wrong. I'm guessing it just freezes "out of the blue", i.e., you don't do anything special to make it happen....in that case ...

Hi! So sorry to hear that !

when did you update?
...please make sure you are using 0.95c, not 0.95b !?

also, in what way does it crash ? does it hang/freeze the computer, does it reboot, or does it crash cubase?

thanks.

sorry...isn't this already possible chris ?
maybe i misunderstand, but "start" and "length" modify start and end of the sample loop, and they can be modulated and automated...

if you mean the sustain loop points....then in that case, no they cannot (currently) be modulated....

no you didn't....but this is usually caused by patching modules togheter in an infinte loop. To correct it turn down the volume in the loop or cut some wires...then turn off the overflowed module and then on again....

sorry to hear that.
are you using the latest version Soundscape ? (0.95c)
and did the system hang or crash ?

Aaargh!! :shock: I think this is strange because I can load the .fxb in my host. :? interesting...what host are you using ? However I removed the .fxb and uploaded the bank in native format. Great! Thanks alot! Notice that I added some patches for karma synth fx...try them! Awesome...looking forwar...

Hi Flos !

Great work!...but I think the bank is broken....(it only contains one patch)
actually I'm pretty sure fxb export doesn't work (while fxp export does)...instead you should propably zip the entire bank directory and upload. sorry

Hi Jose ! Welcome to the forum !
Glad you like the Synth!

you should already be able to do that ?!....ie link scale and bw to external controls....right click and select control submenu.
i've just tested...seems to work fine.
if you want you can the assign the selected control to a midi controller of your choice for live tweaking madness...

the automation does not morph..it simply switches waveform...for morphing one should propably set it up using a the mixer.

its done. will be in next release.

ring modulation between osc 1's is already in, in the shape of the mixer (set to ringmod). However, sync is not possible at the moment, ...not really sure if it will be either... it would require that I made it possible for osc1's to _transmit_ a sync signal, which is a little odd compared to how th...

thanks guys...

lalo: not really sure what you mean....what exactly is it you want to automate ? the actual module type ? or the switches and dropdown parameters in the modules ?

yep...don't see why not....will look into it !!

KarmaFX Synth has been updated.
This is mostly a bugfix release, so no major version change.
See full list of changes here: http://karmafx.dk/news.html

Hey!

Current version expires 1st of February, 2007.
I'll try to write the date on the news-page whenever a new version is released.
When version 1.0 arrives we will of course get rid of the timeout for good.

ok....I see your point...will take it into consideration. hmmm..perhaps, should it only be local for a sample in multi mode? sf2 import is not well polished if thats ehat you mean ...it simply reads the samples, the rootkeys, the velo-ranges...grouping linked stereo samples to stereo, but thats it.....

sorry to hear that....crashes or "hangs", robenestobenz ?

Hi Soundscape! have looked at your patch now... Sorry, but I'm a but confused as to what you want to achieve..?! the problem is that routing the noise generator into an envelope follower (either standalone or in compressor) will make it sit there and be pretty static, since the noise doesn't change ...

it is now

Hi Waite, sorry for slow reply... It should never respond to more than one controller of course....If you just use on mididata module i don't see how that would be possible...? but using midilearn is the way to go, unless of course you now the hex codes for the controllers by heart ;-) btw: please n...

Hi matthew....will consider your suggestion! well, its a little tricky as you propably found out... left click/press and drag on keyboard picture to move root key of sample (ie the fundamental pitch of sample). to adjust velocity range hold shift, and left and right button to set upper left and lowe...

I've updated the download links again, and they seem stable.
The mirrors are still there "just in case"...

hi elektri......

I guess you can either turn down the "out" amp on the mididata module or left press the wire arrow and reduce the amp like that.

was that what you were looking for ?

havn't been able to reproduce this bug yet...have tested on two machines under Live 5 and Live 6, without any "luck"...

if anyone experienced the hang, please let me know what you did to make it happen, and if its reproducable....

thanks.

Seems there is a new bug in KarmaFX Synth v.0.95 that will make it hang (deadlock) in certain situations.
I've only seen it happen once, and I havn't found out why yet, just wanted to let you know...

As soon as its fixed I'll release an update.

- KarmaFX

no problem I guess.
whats the story on this format ?
can anyone send me a link to the specs?

Thanks.

I've updated mirror1 link on the front page with the link !

Hopefully this should be a stable download link.
Still looking into a better solution though...

Thanks for your patience.

- KarmaFX

mirror is now up (kindly provided by ksn)....

http://karmafx.pastnotecut.org/KarmaFX_Synth095.exe

- KarmaFX

My internet service provider is giving me a hard time. They close all downloads after just 2GB of traffic. This unfortunatly makes it hard to get the latest releases. I'm looking into different solutions, one of them being spending some extra cash for a server upgrade. In the mean time, I'll try to ...

KarmaFX Plugin pack 1.9 and KarmaFX Synth Modular 0.95 BETA is now ready for download ! The Synth has been placed in its own installer to make more room for patches, skins, etc. You can find the full list of changes here: http://www.karmafx.dk/news.html ...and download the plugins from the main webp...

btw: Please note that, since a lot of stuff changed in this release, I expect there will be some stability issues.

So, if you run into any bugs, get in touch, and I'll provide a fix ASAP.

Glad to hear it ! Thanks.

I promise to look into the broken aftertouch real soon !!

Sorry, my host is playing tricks on me again

Try it now...

http://karmafx.dk/KarmaFX_Synth095.exe

or alternatively

http://karmafx.net/KarmaFX_Synth095.exe

doh, actually it occurred to me, that you don't have to use the envelope follower since the compressor already has that built-in (i.e., attack/release), so just route your signal to sidechain and mix it in.
sorry, that should work....I hope ?!

you should be able to...havn't tried it though :-) basically you need to route the noise to an envelope follower, and send that signal to "sidechain" in the compressor. Then make sure you turn the input/sidechain mix knob all the way to the right (full sidechain). let me know if you get it...

I found this:
http://www.uaudio.com/webzine/2006/april/index2.html

shows that modeling spring reverb is not so easy....but not impossible

...I promise to look into it later!

yes!

Your'e right!, and I'm on it matthew! A Trigger module propably wont make it into the upcomming version 0.95, but definetly next version, incl. simple arpeggiator features. About the notepitch, a general setup is: Generator->Filter->Amplifier->Controller(Notepitch)->Effect. ie. last in signal chain ...

Thanks for the info! yes it does sound nice!

if you have the impulse response used for the convolution that would be helpful too .... you can send it to me by mail if thats easier.

actually it will come out later *this* month

but Thanks, yes, examples would help.

Thanks for the request....actually, you are not the only one asking for this :) Next release (coming out later this month) will have lots of extra new reverb presets. This might (or might not) be what your'e after. It's not exactly doing spring emulation you see, but still worth checking out. I'll c...

KarmaFX Forum

Search found 1182 matches

KarmaFX Synth Modular 0.95c released

Bug in version 0.95

server problems...

KarmaFX Plugin pack 1.9 and KarmaFX Synth 0.95 Released